Kodak Easyshare Problem Important, Help Please.
4 min read
Okay well i have just recently downloaded Kodak Easyshare Software it installed then i think said error or cannot run then rebooted my computer, i thought it was alrite so i tried it normally again without safemode and worked then it was loading and said new hardware and said digital still camera, when my camera wasnt even in there. Then rebooted my computer again, i went into safemode and then tried removing the program from Add and Remove but it just takes me to the kodak install again, i done it then said error and wont let me delete it.
Please help me get my computer back normally =/
How can i get my computer back to normal without rebooting?
And get rid of the program?
I really need a reply soon
ek.
Hello and Welcome to WhattheTech.
Please do not repeat your posts as they are answered as soon as a volunteer comes by.
How much free disk space have you got on your C:/Drive?
What Antivirus are you running?
What Antispyware have you got installed and are the definitions up to date?
Have you got a Firewall installed and running on startup?
Have you defragged your drive lately?
If you go to start>settings>add and remove>and click on Easysharesoftware>remove> tell us what happens next please?
Please post back with answers to the above………thanks
kind regards,
Too access how much space you have on your C:\Drive, right click on My Computer on your desktop>click on open>right click your drive letter>click on properties and there you will see the used and free space in the cake shown.
To cleanup your HD go to start>all programs>accessories>systemtools>diskcleanup>follow the promps and let it run. Then follow the same instructions and click on Defragmenter and also let that run. If you have not defragged before close all other programs first and do realise this could take some time so be patient and let it run without doing anything else on your computer at the time.
I asked you not to repeat your posts and sadly you have done that once again. Please do not do it as all that is necessary is one post for each reply to the forum thread.
Then I would suggest you do the following so we can have a more informed view of your system.
Please Run the PCPitstop Full Tests, here:
http://www.pcpitstop.com
Register and create a password
Accept the ActiveX component to allow your machine to run the Full Tests
Registering and accepting the ActiveX are both SAFE and FREE.
Full Tests is the first item in the left hand column of that page.
The Full Tests take less than 5 minutes for most machines.
Once you have your Results, please post the TechExpress Link back here into this thread for review.
TechExpress is the last item on the list in the yellow box in upper right area of any Results page.
Post the entire URL link information back here into this Forum thread.
Caution: During the testing of Video Adapter, a variety of patterns, shapes, colors and text are "flashed" onto the users monitor screen. In the many thousands of daily uses of the PCPitstop Full Tests over several years, two individuals who suffer epilepsy experienced discomfort and temporary dizziness when viewing the flashing patterns.
If you know that you are susceptible to photo driven seizure, look away from your screen during the Video Adapter testing sequence.
__________________________
kind regards,
Ask AI
AI can make mistakes. Check the cited posts. Archived advice can be out-of-date
Don't include personal information. Questions and selected public posts go to OpenAI. About Ask AI