I deleted my ATI drivers to install new ones i needed to restart my pc when i did that it loaded windows and now i get a black screen. I read some stuff on the net that the onboard videocard has to be disabled to get into windows.
Ok so you have integrated video correct? Theres a couple ways to go about this, one; pull the CMOS battery and leave it out for more than 30 seconds. Two; close by the CMOS battery there will be a jumper that have the settings "Clear" and "Normal" If you see that on the board then go ahead and place the jumper on the correct setting for "clear" … turn computer on for 5 seconds then turn it off.. move the jumper back to "Normal" and boot up. Either way you get there.. you need to reset CMOS.
Thanks for relpying but i got it back from my computerguy because i had a feeling the HD or the motherboard was broke and yes it was the HD the bootsection to be specific. But its up and running know.
✨ Ask AI
AI can make mistakes. Check the cited posts. Archived advice can be out-of-date
Don't include personal information. Questions and selected public posts go to OpenAI. About Ask AI
