Blue screening all the time

i guess the title says it all… i constantly blue screen for no reason the computer is about 3 months old if that.. its running Intel® Core i7-2700k CPU @ 3.50Ghz 12GB Ram 64bit Operating System the blue screens i'm getting are random a few of them that i get are Memory Management, PNF_list_Corrupt, System_Service_Exception, Bad Pool Header that's just a few that always come up sometimes it didn't even say one i'm really not sure what triggers them to go off but they are all random.. a few people have said it maybe faulty ram sticks or GFX card i'm not sure if someone can help me out that'll be awesome Cheers.

Hello Name Here…. Welcome to
WTT, :thumbsup:
:yes:

I'm sorry to hear about your issue. We will try to help you resolve this as soon as possible.

• Please understand we are all volunteers and we are not here all the time.
• Sometimes it may be a extended amount of time to get back to you. If it has been
  more then 3 days please shoot me a PM and I will try to get back to you quickly
  then.
• Please do the following and supply the requested information as needed. If you
  don't understand my instructions please ask and I will try to explain them
  clearer for you.
• Do not attempt any steps unless instructed or ask before to
  make sure they will not cause any further issues.
• If you are receiving assistance in any other forum site please let us know as there may be conflicting advice given.

Before we can help you need to provide the following so I can start you in the right direction.
Laptop or Desktop?

• If a name brand system then what brand, make and model is the system?
• If custom built then what brand, make and model is the motherboard
• Total memory installed
• Total hard drive capacity and free space
• What steps have you taken so far to resolve the issue

i guess the title says it all… i constantly blue screen for no reason the computer is about 3 months old if that..

First question I have is if this is a branded system and is there a warranty still in affect for the system? Being only 3 months old I would suspect a warranty to be there.

thanks sir, alright answers to your questions.. Before we can help you need to provide the following so I can start you in the right direction. Laptop or Desktop? Desktop. If a name brand system then what brand, make and model is the system? idk ? :S If custom built then what brand, make and model is the motherboard; Intel H67 Chipset Motherboard Total memory installed: 12gb Ram Total hard drive capacity and free space; 1TB What steps have you taken so far to resolve the issue; nothing really, my computer locked up the other day which i had to compeltly format my enitre hardrive yet i still have the same problems.

New install with same problem so we need to check the hard ware. We will start with the following and please let me know what the result is of each diagnostic test when finished.


Run hard drive diagnostics: http://www.tacktech.com/display.cfm?ttid=287
Make sure, you select tool, which is appropriate for the brand of your hard drive.
Depending on the program, it'll create bootable floppy, or bootable CD.
If downloaded file is of .iso type, use ImgBurn: http://www.imgburn.com/ to burn .iso file to a CD (select "Write image file to disc" option), and make the CD bootable.

NOTE. If your hard drive is made by Toshiba, try the Hitachi DFT CD Image version of the software

Thanks to Broni for the instructions



A If you have more than one RAM module installed, try starting computer with one RAM stick at a time.

NOTE Keep in mind, the manual check listed above is always superior to the software check, listed below. DO NOT proceed with memtest, if you can go with option A

B. If you have only one RAM stick installed…
…run memtest…


1. Download - Pre-Compiled Bootable ISO (.zip). If you prefer to use the USB version then use this link USB KEY
2. Unzip downloaded /memtest86+-4.20.iso.zip file.
3. Inside, you'll find /memtest86+-4.20.iso file.
4. Download, and install ImgBurn: http://www.imgburn.com/
5. Insert blank CD into your CD drive.
6. Open ImgBurn, and click on Write image file to disc
7. Click on Browse for a file… icon:

[external image: Posted Image]

8. Locate memtest86+-4.20.iso file, and click Open button.
9. Click on ImgBurn green arrow to start burning bootable memtest86 CD:

[external image: Posted Image]

10. Once the CD is created, boot from it, and memtest will automatically start to run. You may have to change the boot sequence in your BIOS to make it work right.

To change Boot Sequence in your BIOS
Reboot the system and at the first post screen (where it is counting up memory) start tapping the DEL button
This will enter you into the Bios\Cmos area.
Find the Advanced area and click Enter
Look for Boot Sequence or Boot Options and highlight that click Enter
Now highlight the first drive and follow the directions on the bottom of the screen on how to modify it and change it to CDrom.
Change the second drive to the C or Main Drive
Once that is done then click F10 to Save and Exit
You will prompted to enter Y to verify Save and Exit. Click Y and the system will now reboot with the new settings.


The running program will look something like this depending on the size and number of ram modules installed:


[external image: Posted Image]

It's recommended to run 5-6 passes. Each pass contains very same 8 tests.

This will show the progress of the test. It can take a while. Be patient, or leave it running overnight.

[external image: Posted Image]

The following image is the test results area:

[external image: Posted Image]

The most important item here is the “errors” line. If you see ANY errors, even one, most likely, you have bad RAM.