Hi all, I'm running WIN98SE (4.10.2222) and tried to install a Netgear GA311 network adapter card. Ran the installation disk first, and it had problems finding files from my WIN98 disk. Ended up extracting files from disk to hard drive then was able to install software. I then installed the GA311 by removing a parallel card not being used and when I restarted got blue screen with "VFAT Device Initialization Failed. A device or resource required by VFAT is not present or is unavailable. VFAT cannot continue loading. System halted. Searched error message and found a common response from Microsoft and others to check: If the Ifshlp.sys file is missing from the Windows folder. -or If the Config.sys file contains a line that points to a previous version of the Ifshlp.sys file. -or- If the following Ifshlp.sys statement is deleted from the Config.sys file after you reinstall Windows: DEVICE=C:\Windows\Ifshlp.sys -or- If the [Paths] section in the Msdos.sys file is incorrect. -or- If a Winboot.ini file from a previous incomplete installation is present in the root folder on your Startup disk. -or- If a "maxfile cache = 4096" line is present in the System.ini file. All checked out OK. If I remove the card, it will boot up without the error. Any suggestions??