This is a read-only archive. No new posts or registrations. Privacy Page Still need help? Ask the volunteers at Geeks to Go, free.
Software

A:\

5 min read

This thread's last reply is from . Advice, software, and links below may be out of date — treat specific steps and download links with caution.

Hello I tried to transfer my old floppies to dvds but ran into a problem. The error message is, "A:\ not accessible No id address mark was found on the floppy. I went to device manager and tried to update driver with the o.s. disc inserted but it said the driver is ok. I rebooted, tried new floppies, went to my computer and tried to open a disc all with no luck. Is there a way to trouble shoot a bad disc rather than just drawing a conclusion that it is broken because it did not function under these circustances. I created the pix with another pc so formatting could be a problem but I don't know how to resolve it. Any ideas? Thank you
Do you have A:\ Floppy Disk Driver (removable media) active in your BIOS? Does A:\ appear in your My Computer\Windows Explorer How is A:\ identified in Administrative Tools - Disk Management (healthy ? ) The above should be obvious to me since you are already getting an error report, but just asking. Are you able to read the contents on your Floppies using a different machine? I have dozens of Floppies still laying around. Most of my "utility" floppies, like F-disk, Win-Startup, etc. are still functional. Some of my Data Floppies are no longer accessible.
I am unclear about BIOS . I put floppy in drive and it said it needs to be formatted but wen I clicked ok it said it was unable to do so. I wonder if all the pictures of grand children are now no good. I do not have access to another floppy drive. I have empty floppies and I would think they would be ok to write to if I have the drive set ok. but how?
Hello I took the A:\ drive out and could not get inside b/c there was a ciruit board in the way + I'm no tech. I could see, in the very rear, some loose brown tape. I do not kbow if this is left over from some floppy or if there is brown tape as part of the A: drive. It seems to pe be an integral part of the drive itself not just something floating in there. I guess the drive is n/g but do you have a comment on that brown ?1/8" wide 3" section of tape? I'm curious b/c if it is old floppy material it might be worth getting it out but if A: drives have tape themselves then the drive is a lost cause. Thank you
Grampy Pete, What you describe makes me think of the old compact disk tape for music recording. But there is no "recording tape involved in a Floppy Drive. Are you looking deep inside of the Floppie Drive? What you are probably seeing is the wiring harness, which is a flat ribbon of about the size and shape that you describe and is usually brown in color. Manufacturers embed the tiny wires (to power and control the Floppy unit) onto a brown plastic ribbon for neatness and efficiency.
If it is laying loose in there, gently fish it out before using the drive unit again. If it is attached in there, it is the electrical wiring harness.
They make diskette cleaning kits. Usually only cost $5 or so. I've used them with great success on many computers showing exactly the same symptoms you are seeing.

You put a little denatured alcohol that comes with the kit, on the opening in the diskette, then put it in and try to open it from Windows Explorer. As the diskette turns, it cleans the drive head and often resolves the problem.

This one for instance: http://www.cables4computer.com/Accessories…eaning_Kit.html

You may find equally cheap ones at BestBuy, Staples or even Walmart.
Hi Z I have to reassemble the A: drive as floppies go in but something is not lined up after I took it apart.. I will take time to reassemble then get the cleaner. Thank you
While you've got it apart, you can clean the read/write head with a cotton swap and alcohol, just like you would do with a tape recorder. If you do that then you won't need to cleaning kit as that is what it does, only it save you having to disassemble the drive.
Hello Regarding that A: drive that stopped working; the strangest outcome has occured and although it is good, I like to know why something malfunctioned. I took the drive out of the machine then separated the two halves. I put a disc in and after a few tries, it began to receive and eject the disc. It received the disc before but did not really seat. Now, when I assembled the two halves, it would only work with one of the four screws NOT inserted. Apparently there is some teeny problem with pressure on something inside the drive on one corner?? The puzzling part is that the drive stopped without any one touching it. Now one missing screw makes it function. And yes, I was doing trial and error for sometime. At least I have my old flopy back. It has run consistently well. Can any one explain why this is occuring? Thank you
Eventually you may only be able to assign the cause to mysterious "gremlins". But think about what the floppy disk drive is and does. Inserting a Floppy Disk is just about the most forceful/jarring function that you would ordinarily perform. Pushing the Floppy Disk in and then the mechanism "snaps" it into place. Then the Floppy drive spins the encased disk at tens of thousands of RPMs. Then to remove the Floppy Disk, you must push a button that physically forces the Floppy Disk to snap and then pop out. Lots of "physical" abuse going on at that Floppy Disk unit. If the case mounting screws were ever "loose", then the jarring and the RPM vibration could have caused them to tighten up, over-tighten or even loosen up. Now when you have properly adjusted and installed the Floppy Disk Drive, "one" of the mounting screws apparently extends just a bit too far into the unit case. The accumulated stress and distortion could have made the difference. Or if you prefer….. it was the gremlins. Best Regards
It is true about the manhandling etc. I am ot using it and always like to update my issues. Thanx and now I'll scoot over to you to talk about routers.

Still having this problem?

This topic is from the What the Tech archive and can't take new replies. Geeks to Go is an active, free help community run by volunteers. Post your question there and a person, not a bot, will work through it with you.

Ask on Geeks to Go →