… sometimes when i turn on the computer everything works but internet explorer. like all my other prograsms can get online. i reboot and it works. what gives?
when the internet stops working, it times out when i hit refresh or try to get onto a site.
i pinged that page when it wasnt working and i got a response. 72ms average.
Is the XP machine set to automatically renew the ip addy?
If you can get to your modem settings page, make sure its set up to run a network or "share a public IP". Then go to your router settings page and under DHCP make sure its set to allow atleast 2 users. Then make sure each computer is set to automatically renew the IP addy and you should be set to go..
also.. is your router a linksys?
Is the XP machine set to automatically renew the ip addy?
If you can get to your modem settings page, make sure its set up to run a network or "share a public IP". Then go to your router settings page and under DHCP make sure its set to allow atleast 2 users. Then make sure each computer is set to automatically renew the IP addy and you should be set to go..
Ok heres what you need to do. …well.. before we do all this.. check and see if NetworkDDE services are both running (started)and on automatic and that the "Routing and Remote Access" is set to "Manual" (it doesnt need to be started, just make sure its not disabled).. and post back
Ok heres what you need to do. …well.. before we do all this.. check and see if NetworkDDE services are both running (started)and on automatic and that the "Routing and Remote Access" is set to "Manual" (it doesnt need to be started, just make sure its not disabled).. and post back
ok… and how would i check this? i know how to do some things on the computer but not find hidden proccess settings.
I have basically the same problem but with Windows 2000 Business Edition. System worked fine until a few days ago I couldn't access the internet. I have broadband. I had 3 techs check it out and no one could find out what happened. The rest of the system works fine. Any ideas. We did release the IP address and still got nowhere. Would appreciate any insight!
Sissy1954- Could I talk you in to starting a new thread with your question please..? When you post one into someone elses thread it may not get seen. Thank you : )
Ok, I am sorry for not being more specific there. I was in a hurry when I posted that. Go into control panel and click on "admin tools". From there click on the "services" icon and when the window opens.. click to maximize the window so you can see everything. In the window on the right hand side were all the process' are showing, scroll down till you see the "NetworkDDE" and "NetworkDDE DSDM" (these are listed in alphabetical order by the way and should be one right on top of the other) Now, out the right (under the "Status" colum) it will either say nothing at all or it will say "Started". Right next to that under the "Startup Type" colum it will say either "Manual"…"Automatic"… or "Disabled". You want these to two services to be set on automatic and you want them both started so (and providing there not already, if they are then skip this) right click on "Network DDE" and choose properties, under the "General" tab, you will see a dropdown menu there were you can set this service to "Automatic"..or "Disabled".. or "Manual"… set it to Automatic then click Apply. Now under the "LogOn" tab you will see were it says "Profile 1" …right click on "Profile 1" to highlight it… then directly underneath and to the right of that window you will "Enable" and "Disable" buttons (one greyed out for its current setting) Click to "Enable" it then click "Apply". Now go back to the "General" tab and you will see the button to "Start" or "Stop" the service (again, one greyed out for its current setting) and click to "Start" it. Then click "Apply" (if you can..if its greyed out its ok.) Then click "Ok".
Now, If when you click to start the service you get an error or a popup saying "The service cannot start..etc..etc" Its ok. Simply go the next service below "Network DDE" which will be "Network DDE DSDM" and follow the same instructions as you did above. When you click to start this service it will start both of them.
Now scroll down till you find "Routing and Remote access" and look out to the right under "Startup Type" and make sure its set to "Manual" . You can follow the instructions above MINUS the last part. This service, more than likely you will not be able to start so just make sure that its enabled and is set to "Manual".
try that and then post back
If you still have issues, close all browser type windows… open hijack this and scan..is this entry still there —> R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings,ProxyOverride = localhost ….? If so have hijack this fix it and you will be set.