Hi CatByte I Still Dont Have INTERNET ACCESS and the pop ups on my Desktop are / Arcsoft Connect Notifier has Stopped Working - WSA Startup Failed - Microsoft.NET Framework - Windows Defender - Failed to Connect to a Windows Service, Still Death Blue Screen!!! Hi i RESTARTED and now i got a message from THREAT FIRE ~ RISK: VERY HIGH ~ NAME:eDataSecurity System Loader ( Load and prepaire enviroment ) - EDSLOADER.EXE ~ PATH: C:\ACER\EMPOWERING TECHNOLOGY\EDATASECURITY and i also got the pop up to instuall INTERNET EXPLORER 8 CatByte should i go ahead and INSTAUL could you let me no a YES or No .
1. Click on Start button.
2. Type Cmd in the Start Search text box. > that will bring up a command prompt
3. Type the following command at the command prompt
go back into safe mode in the administrator account as you did before.
1. Click on Start button.
2. Type Cmd in the Start Search text box. > that will bring up a command prompt
3. Type the following command at the command prompt
ipconfig /flushdns
(note the space between …g /f… it needs to be there)
Hi CatByte I Still Dont Have INTERNET ACCESS and the pop ups on my Desktop are / Arcsoft Connect Notifier has Stopped Working - WSA Startup Failed - Microsoft.NET Framework - Windows Defender - Failed to Connect to a Windows Service, Still Death Blue Screen!!! Hi i RESTARTED and now i got a message from THREAT FIRE ~ RISK: VERY HIGH ~ NAME:eDataSecurity System Loader ( Load and prepaire enviroment ) - EDSLOADER.EXE ~ PATH: C:\ACER\EMPOWERING TECHNOLOGY\EDATASECURITY !!!!! PLUS I RESTARTED AGAIN AND UNPLUGGED MY MODEM REBOOTED STILL THE SAME MESSAGES!!!!!
Please tell me what messages you got after you entered the commands in safe mode at the command prompt.
did anything happen at all?
Plug the modem back in.
please reset the IP
please do this:
Log in in safe mode as Administrator
Try the IPconfig command.
Go to Start
Type Cmd in the Start Search text box
You will now see a black DOS-like screen with a command prompt
Type the following at the command prompt:
IPconfig /release. (Note the space between the "g" and the slash / it needs to be there)
Hit enter Then type:
IPconfig /Renew (Note the space between the "g" and the slash / it needs to be there)
Hit enter
See if you get your connection back
If that doesn't work - move on to this next step:
Log in in safe mode as Administrator
Go to Start
Type Cmd in the Start Search text box
You will now see a black DOS-like screen with a command prompt
Type the following commands - one at a time - at the command prompt:
netsh winsock reset catalog hit enter - then type
netsh int ipv4 reset reset.log hit enter - then type
netsh int ipv6 reset reset.log hit enter - then type exit
Reboot the machine.
If that doesn't work - try this next step:
If you have the network icon in your system tray right click and click on Diagnose and Repair.
[external image: Posted Image]
If you can’t find the Networking icon, the other way to get to this feature would be to open up the Start Menu
click on Network.
Then click on Network and Sharing Center in the blue menu bar.
RECAP : its been SIX Days Now since my P.C. has bean INFECTED with ''Kuasio / Smitfraud-c.genetic'' which is P###NG me OFF ! THANK YOU CATBYTE & EVERYONE AT WHAT THE TECH FOR ALL YOUR HELP CHEERS.
Hi,
yes I do understand how long it has been and how frustrating this is for you, but I am doing the best that I can to help you.
it would help me out more if you could reply to just the instructions i give to you
read each instruction - one by one - follow it as best you can
make a note what happens when you try each instruction
then describe what happened for each instruction in your reply to me.
other than the messages you get at start up and your lack of internet connection, can you operate your computer normally?
If not - what symptoms are there.
Please try the steps to reset your connection as outlined in my previous post - describe what happens
then answer the question I have posted here
Still no INTERNET and i have KEYED IN ALL OF YOUR INSTRUCTIONS into ''Command Prompt''and contacted my ISP and they say that my Connection is working fine at theare end and i even shut down the Wireless Network and Rebooted Still no Connection and too Answer your Question everything Else is working fine on the P.C. i CAN Open fILES DO THE GENERAL STUFF L IKE CHECK Documents and stuff Still Got BLUESCREEN and it takes about 2 Minute Extra to Start up and IAM THE ONLY SOLE USER ADMINASTRATOR OF THE pc and i have followed all your instructions you have given me and i have been online for about 6 years and i use the internet for Bizness its not the first time i have lost connection however it is the first time it has happend this way !!!!!
[-]RAS Async Adapter [23/07/2009]
[-]Atheros AR5007UG Wireless Network Adapter #2 [23/07/2009]
[-]Atheros AR5007UG Wireless Network Adapter [23/07/2009]
Ports
[-]Nokia 5310 XpressMusic USB (COM4) [23/07/2009]
[-]Nokia 5310 XpressMusic USB (COM5) [23/07/2009]
Processor
Intel® Core™2 Duo CPU E4500 @ 2.20GHz [23/07/2009]
Intel® Core™2 Duo CPU E4500 @ 2.20GHz [23/07/2009]
SCSIAdapter
Microsoft iSCSI Initiator [23/07/2009]
System
ACPI Fixed Feature Button [23/07/2009]
PCI bus [23/07/2009]
System CMOS/real time clock [23/07/2009]
[*]ACPI Power Button [23/07/2009]
ACPI Thermal Zone [23/07/2009]
Microsoft ACPI-Compliant System [23/07/2009]
Intel® 82801 PCI Bridge - 244E [23/07/2009]
Intel® 82801GH (ICH7DH) LPC Interface Controller - 27B0 [23/07/2009]
Intel® 82801G (ICH7 Family) PCI Express Root Port - 27D0 [23/07/2009]
Intel® 82801G (ICH7 Family) PCI Express Root Port - 27D4 [23/07/2009]
High Definition Audio Controller [23/07/2009]
Intel® G33/G31/P35 Express Chipset Processor to I/O Controller - 29C0 [23/07/2009]
[*]Terminal Server Keyboard Driver [23/07/2009]
[*]Terminal Server Mouse Driver [23/07/2009]
Plug and Play Software Device Enumerator [23/07/2009]
Intel® software driver for Intel® Viiv™ technology [23/07/2009]
Microsoft System Management BIOS Driver [23/07/2009]
UMBus Root Bus Enumerator [23/07/2009]
[*]Volume Manager [23/07/2009]
