Sorry guys but this is most important to me at the moment as I need to sort this out. I have have a wireless rounter XAVI x7768R installed for about six months. As the instructions and disk are in Spanish I installed it in a fashion that it works ok using the cat5 cable into my computer and seems that the Wirelss part has never worked. I recently managed to get hold of the installion and set up instructions in English (not the install disk tho) which remanins in Spainsh. I followed the notes in the install pdf file, reset the modem - pen into hole in rear for 10 seconds to restore to factory setting. All of a sudden my w-lan light flashes and I have at last wireless - which works on my other computer using a usb stick dongle thingy. As my adls is not secure/protected it is obvioulsy open to one and all and despite me trying to get into the settings of the modem (typing in the 192.168.1.1 i can never get into it, keep getting page not available. I have tried dozens of times and withoout this I cannot create a secure passwrded connection.

Any help and suggestions would be most appreciated and I will be in your debt forever. This, I understand needs sorting by me rather quicky and have been out, so badly nearly bald as a coot.

Thanks again and hopefully after this I can return the help to others on this great forum

This post has been edited by luckydog1: Apr 11 2008, 05:09 PM

Greetings LuckyDog1

Sorry to hear about your router trouble.

Could be as simple as how you typed the ip address in the internet explorer browser. You were using a browser right?

I read a English manual on your device as well, what I saw was that wireless was disabled by default.

Wonder what you did to enable it without going through the configuration menu?

For now lets get you to open up a command prompt and get some information posted so we all can see it.

Click on the vista start orb, type in the search box--->cmd

You should get a search result for the CMD application/program

Right click on that result and choose run as administrator. Ok through the UAC

You should get a black box/screen with a command line and blinking cursor.

Type this--->ipconfig /all

Note the space between the ipconfig and the / (slash)

You will get a read out of your ip configuration.

Right click on the screen and choose select all, and paste this to Notepad. After doing so you can x out or type exit at the command line prompt.

Come on back to this post and copy and paste off that Notepad you made into a post.

This should give us a look at what you have going on between you and your computer.

Regards

Kaz.

This post has been edited by kazzoo: Apr 11 2008, 06:47 PM

Cheers Kazzoo, here is a copy as requested ... hope I have got you the right info - please note that I used my XP computer to get this info as the wireless modem is plugged into this.

Microsoft Windows XP [Version 5.1.2600]
© Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Dave>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : home-eedkkeu1i4
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce MCP Networking Adapter

Physical Address. . . . . . . . . : 00-E0-18-77-93-18
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 80.58.61.250
80.58.61.254

This post has been edited by luckydog1: Apr 12 2008, 07:02 AM

Hi,
As kaz is in a different time zone I hope he won't mind me jumping in here.
Try this from the computer that is wired with a cat 5 cable to your router:
FOR XP
Start
Run
in the white box type the following:
http://192.168.0.1
Your browser should open at the router's opening page.
If that doesn't work use http://192.168.1.1
(you can now use the default user name and password, see manual, to set it up the way you want)

For Vista
after you have started your computer just type the following:
run
note it doesn't have to be typed in anywhere special, just type it, and then follow the above instructions.
See how you go and either kaz or I will be back to see how you got on.
Regards
paws

Hi Paws ... thanks for your reply, sadly I have tried your suggestions using both http://192.168.0.1 and the http://192.168.1.1 but still get the blank page saying not available. It's very frustrating for something that should be so straightforward. Any other suggestions ??? I am really dependant on you guys and truly appreciate your help.

Dave (Luckydog1)

luckydog1,

One problem I see from previous posts is that your PC's DHCP is DISABLED, Your PCs IP address is set to 192.168.0.1 and your Router's address is set to 192.168.1.1. Given THOSE two settings, your PC and router will NOT be able to communicate as they are NOT on the same network.

Open up your Control Panel, click on "Network Connections", from this window, right-click on your "Local Area Network" connect and click on Properties. Scroll through the "This connection uses the following Items" down to TCP/IP. Select TCP/IP, then click the Properties button below. From here, click on "Obtain an IP address automatically". If "Obtain an IP address automatically". If "Obttain an IP address automatically" was NOT selected and you changed it - click OK, OK then REBOOT your PC and see you you're able to access the Internet. If "Obtain an IP Address Automatically" WAS already selected, then we should try to statically assign your PC's IP address as follows:

In the IP tab (see above), check "Use the Following IP Address", the change the address to the following:

IP Address: 192.168.1.13

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.1

Preferred DNS: 80.58.61.250

Alternate DNS: 80.58.61.254

Click OK, the OK again. then reboot your PC.

Either way, once your PC has rebooted - see if you can get on the Internet. If so - then you're OK. If not, try opening up Internet Explorer and going to the address

192.168.1.1

use the Username: 1234
use the Password: 1234

This should help. If not, then there's likely a physical connect or adapter configuration setting that's preventing your PC from connecting to you router. If this is the case, reply and I'll give you futher assistance.

BTW - you can access the English version of your router's USER MANUAL at:

http://www.telefonicaonline.com/on/es/arch..._Xavi_7768r.pdf

Hope all of this helps!

- John

*** I have made a scrren shot of the Network connections on my computer - hope this might help !

luckydog1,

Follow my directions - making changes the the "Local Area Connection" icon in your Network Connections window. Your router/adsl modem is capable of making the PPPoE connection - so we can remove the PPPoE (Conexion PPPoE AIM) connection from your Windows XP Netowork Connections. Instead of using THIS - we can configure your ROUTER/MODEM to automatically connect via PPPoE with your DSL username/password.

Reply back soon and I can walk you through the configuration of your ADSL modem/router.

- John

luckydog1,

Just to restate what's going on with your network configuration based on your more recent scren shots as well as my review of your cable modem's manual:

You DO NOT need the PPPoE MiniPort connections in your Network Connections screen. This is becacause your ADSL MODEM is capable of making it's OWN PPPoE connection to your ISP. All we need to do is configure your ADSL modem for PPPoE - setting up your ISP Username / Password. This will allow your MODEM to connect to your ISP BY ITSELF - rather than have to connect via your PC. This should drastically simplify things for you.

Pleaase reply and I'[m confident that I can help you get this set up properly.

- John

Hi John, your help is much appreciated .... update is that at last (thanks to you) I have managed to get to the 192.168.1.1 log-in bit but when I enter the password 1234 and username 1234 is will not accept these for some reason
- any suggestions ?

In your last reply you state that the PPPoE MiniPort connection is not required, do I need to delete or disconnect from this please.

Thanks.

luckydog1,

According to the English manual for your ADSL modem I found at:

http://www.telefonicaonline.com/on/es/arch..._Xavi_7768r.pdf

Both the default USERNAME & PASSWORD are 1234. It's possible that your ISP has modified the modem to have DIFFERENT usernames & passwords. You may want to try to "Factory Reset" the modem FIRST and see if username 1234 and password 1234 work. To factory reset the modem, press a bent paperclip into the small hole to the left of the WAN jack on the back of the modem. Hold this down for about 10 seconds in order to factory reset the modem (see manual above).

As best I can tell from reading through your modem's manual - it (the MODEM) can be configured for PPPoE meaning that if you enter your ISP username/password into the modem's PPPPoE setup screen, the MODEM will make a PPPoE connection to the internet. This means that you DO NOT NEED the PPPoE miniport network connection on ANY of your PCs. You basically ONLY need the Local Area Network connection. Having a modem that automatically connects to your DSL service via PPPoE eliminates the need to install PPPoE software on your PC(s).

I would recommend reading through the manual in the link above. If after factory resettting your modem with a paperclick, it does NOT allow you to access it with the username/password of 1234/1234 - then contact your ISP to see if they've changed the default password.

Hope this helps.

- John

Greetings all.

Looks like your are in good hands Luckydog1. Yes looks like the next stage is getting access to the Router configuration. Without that, obviously you can not set any security for the wireless.

To clear up a question, is this Wireless router XAVI x7768R something YOU bought to HOOK to a ISP provided modem? Or is this device one the ISP provided or made you buy?

Does your setup look something like:

Dsl modem------->Router-------->Computer? (each being a separate device)

Just trying to get a mind picture.

That and you were getting a internet connection as well as it was?

Regards

Kaz.

Firstly may I thank all you guys for your help and guidence to date .... (Apologies for delay in reply but had to go to work

I have followed the advice and so far got as far as the log-in problem, I have reset the router as instructed but for some reason the 1234 username/password does not work. As far as I am aware these have not been changed by the ISP provider (in my case Telefonica.net of Spain) so I am somewhat in limbo. Their (so called) ADSL support line will only speak Spanish despite them having a few million 'foreign' customers and charge premium rates for the calls.

Anyway back to the problem in hand, in answer to Kazzoo I used to have an ADSL modem from Telefonica and then I decided to purchase this Router from them but never attempted to set it up until now when I need a wireless set-up. My exact set-up is the router is connected by a cat 5 cable, power lead and a phone line direct from the wall socket into the back of the router.

I am sorry to burden you all with my problem but feel assured you can help me sort it out.

VERY much appreciated. Dave (Luckydog1)

This post has been edited by luckydog1: Apr 12 2008, 01:21 PM

luckydog1,

Did you "Factory Reset" your ADSL modem? If so, did you have any luck with the default username & password of 1234, 1234? If you factory reset the ADSL modem and make the IP changes I suggested to your PC, you whould be able to get to the router by bringing up you browser and going to 192.168.1.1. If you connect successfully, you should be able to access the router with username 1234 and password 1234. If this username and password DOES NOT work, the your ISP has likely modified the firmware on the router and changed the username/password from factory defaults.

Where do you live and WHO is your DSL ISP? Knowing this will help in determining any possible special settings required on your DSL modem.

John

Hi John, I have just this minute done a Factory reset and finally managed to 'get in' to the setting etc, using the 1234 !!!!
*********** DONE IT GUYS !!!!! *********** Well I think so .... 60 fags later, two long walks, stiff drink and ready for bed

I have been into the router settings and enabled/set the wireless WLAN working, used a self made encription and when I used my other computer it sure did ask for the code, entered it and on-line it went, connected no trouble. After re-booting my main computer and router I looked at my internet connections (via control panel) and it shows LAN connected, IP address of 192.168.1.33 (strange ?) subnet of 255.255.255.0 assigned by DHCP. The ADSL AIM connection is showing as disconnected so overall I seemed to have sorted it in a fashion ....

Can I just say you guys have been sooooooo helpful and I am sure you will be glad to see the back of my 'post'. I could never have done it with out you all - it is really, really appreciated and I have learned today there really is GOOD people out there in this world. I will be looking at making a donation to the forum in the near future as a BIG THANK YOU "What The Tech"

This post has been edited by luckydog1: Apr 12 2008, 04:56 PM